Filter
Top Products
BYPASSENG PROTECTION ZONES
Using the
❑
6 BYPASS Key
This key is used when you want to arm your system with one or more zones
intentionally unprotected. The system must be disarmed first.
1. Enter your security code and press the BYPASS key.
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.).
Single digit zone numbers must be preceded by a zero (e.g. 05, 06).
3. When finished, the console will momentarily display a “Bypass” message for
each bypassed zone number. Wait for these zones to be displayed, to
confirm their bypass.
4. Arm the system as usual.
Bypassed zones are unprotected and will not cause an alarm if
violated while your system is armed.
TO
BYPASS ZONES:
● ENTER CODE.
● PRESS BYPASS KEY.
● ENTER ZONE Nos.
● WAIT FOR BYPASSED ZONES
TO BE DISPLAYED.
● ARM SYSTEM AS USUAL.
TYPICAL MOMENTARY DISPLAYS
OF BYPASSED ZONE
ffYPR5506F(?OflT
uP5Tfli+e5BFoRoof?
ALPHA
FIXED-WORD
–14-