Filter
Top Products
Silencing 1.
Fire Alarms
2.
3.
4.
FIRE ALARM SYSTEM
IF INSTALLED
Silence
the alarm by pressing the OFF key (security code not needed to
silence fire alarms). To clear the display, enter your code and press the OFF
key again (Memory of Alarm).
[f the Console’s fire indication does not clear after the second
OFF
sequence, smoke detectors may still be responding to smoke or heat
producing objects in their vicinity. Investigate, and should this be the case,
eliminate the source of heat or smoke.
If this does not remedy the problem, there may still be smoke in the detector.
Clear it by fanning the detector for about 30 seconds.
When the problem has been corrected, clear the display by entering your
code and pressing the OFF key.
-30–