Filter
Top Products
Using the
n
1 OFF Key
DISARMING THE SYSTEM
AND SILENCING ALARMS
The OFF key is used to disarm the system and to
sounds.
To Disarm the System
silence alarm and trouble
Enter your securitv code and Dress the OFF kev. The “Ready” message will
be displayed, and the console will emit a single tone to confirm that the system
is disarmed.
To Silence a Burglary Alarm
SEE IMPORTANT NOTE AT LEFT!
Enter your security
code and mess the OFF kev to silence the alarm (or
warning tones of a Memory of Alarm). Note the zone in alarm on the console
display, and make that zone intact (close door, window, etc.). Now enter the
security code plus OFF sequence again to clear the console’s Memory of Alarm
display. If the display will not clear and does not provide a “Ready” message,
notify the alarm agency.
To Silence a Fire Alarm simdv p
ress the OFF kev (the security code is not
needed to silence FIRE alarms). TO then clear the console’s Memory of Alarm
display, enter your security code and press the OFF key.
See page 29 for additional fire alarm information.
See the SUMMARY OF AUDIBLE/VISUAL NOTIFICATION section for
information which will help you to distinguish between FIRE
(lnterrupted/pulsed) and BURGLARY (Continuous/Steady) alarm
sounds.
-20-