Filter
Top Products
CHECKING FOR OPEN ZONES
Using the Before arming your system, all protected doors, windows and other protection
❑ READY Key
zones must be closed or bypassed (see 13YPASS//VG PROTECT/ON ZONES
section), otherwise the console will display a “Not Ready” message, and if your
console has a READY indicator light, it will not be lit.. The READY (~) key can
be used to display all faulted zones, making it easier for you to secure any open
zone.
To display faulted zones, simply press and release the READY (+f) key (do not
enter code first), Secure or bypass the zones displayed before arming the
system.
A “Ready” message will be displayed when all protection zones have been
either closed or bypassed and the console’s READY indicator light (if present)
will be lit.
~
TYPICAL DISPLAYS
WHEN NOT READY TO ARM
TYPICAL DISPLAYS
INDICATING OPEN PROTECTION ZONE
(AFTER PRESSING READY KEY)
TYPICAL DISPLAYS
INDICATING “READY TO ARM”
I
D15fft?ff.D -PRESS ~
Tosffoumu[ 75
I
ALPHA
Ac
NorFIEAoY
FIXED-WORD
ALPHA
AC
NOT READY
~
FIXED-WORD
-13-
FIXED-WORD