Filter
Top Products
General Information
Exit Delay
Alerting Sound
ENTRY/EXIT DELAYS
Your system has preset time delays, known as exit delay and entry delay. When
you arm your system, exit delay gives you time to leave through the entry/exit
door without setting off an alarm. Entry delay gives you time to disarm the
system when you reenter through the entry/exit door. The system must be
disarmed, however, before the entry delay period ends, or an alarm will occur.
The console will beep slowly during the entry delay period, reminding you to
disarm the system,
You can also arm the system with no entry delay at all by using either INSTANT
or MAXIMUM arming modes. These
modes can provide greater security while
you are sleeping or while
you are away for extended periods of time.
If available for your system, and if so-programmed by your installer, when
arming AWAY (see page 18) or MAXIMUM (see page 19), slow beeps will
sound from the console during exit delay, turning to fast beeps during the final
five seconds of the delay time. -
See your installer for your delay times and record them here:
Exit Delay: ~] seconds
Entry Delay: ~] seconds
–12–