Honeywell 4111XM Home Security System User Manual


 
FIRE ALARM SYSTEM
IF INSTALLED
General Your fire alarm system (if installed) is on 24 hours a day, for continuous
protection. In the event of an emergency, the strategically located smoke and
heat detectors will automatically send signals to
your system, triggering a loud,
interrupted sound from the Console. An interrupted sound will also be produced
by optional exterior sounders. A FIRE
message will appear at your Console and
remain on until you silence the alarm.
[n Case Of 1.
Fire Alarm
2.
3.
4.
Should you become
aware of a fire emergency before your detectors sense
the problem, go to your nearest Console and manually initiate an alarm by
pressing the panic key pair assigned as FIRE emergency (if programmed by
the installer) as indicated on page 23.
Evacuate all occupants from the premises.
If flames and/or smoke are present, leave the premises and notify your local
Fire Department immediately.
If no flames or smoke are apparent, investigate the cause of the alarm. The
zone number(s) of the zone(s) in an alarm condition will be displayed at the
Console.
TYPICAL FIRE EMERGENCY
-1
ALPHA
–29-
DISPLAYS
FIRE
FIXED-WORD