Filter
Top Products
7.
8.
TESTING THE SYSTEM
After all protection points have been checked and restored, there should be
no zone identification numbers displayed. If a problem is experienced
with any protection point (no confirming sounds, no display),
CALL FOR SERVICE IMMEDIATELY.
Turn off the Test mode by
entering the security code and pressing the OFF
key.
I
WITH SOME SYSTEMS,
1
THE TEST MODE WILL BE AUTOMATICALLY TERMINATED AFTER 4 HOURS,
IF THE USER DOES NOT MANUALLY TERMINATE IT SOONER.
This insures that the Fire and Panic zones will not remain disabled.
d
-25-