Filter
Top Products
TROUBLE CONDITIONS
“Check” and
The word CHECK on the console’s display, accompanied by a “beeping” at the
“Battery” Displays
console, indicates a trouble condition in the system.
To silence the beeping for these conditions, press any key.
1. A display of “CHECK” and one or more zone numbers indicates
that a problem exists with the displayed zone(s) and requires your attention.
If the CHECK display relates to a fire zone, CALL FOR SERVICE
IMMEDIATELY.
Determine if the zone(s) displayed are intact and make them so if they are
not. If the problem has been corrected, the display can be cleared if you
enter the OFF sequence (user code plus OFF key) twice. If the display
persists, CALL FOR SERVICE IMMEDIATELY.
2. If there are wireless sensors* in your system,
the CHECK condition
may also be caused
by some change in the environment that prevents the
receiver from hearing a particular
sensor. CALL FOR SERVICE
IMMEDIATELY if this occurs.
-1 -~
ALPHA
-~
FIXED-WORD
-26–