Honeywell 4111XM Home Security System User Manual


 
QUICK GUIDE TO ALARM SYSTEM FUNCTIONS
Fll Nf7T10N iPRr’)CFr)ll RF [ ~t7MilfulFNTC I
-------- ..
. ------ ----
. . ....... .. ,-
Check Zones
Press READY key.
To view faulted zones when system @ ready.
Arm System
Enter code. Press arming key desired:
Arms system in mode selected.
(AWAY, STAY, INSTANT, MAXIMUM)
Quick Arm Press #. Press arming key desired:
Arms system in mode selected, quickly and without use of code.
(if programmed) (AWAY, STAY, INSTANT, MAXIMUM)
Bypass Zone(s)
Enter code. Press BYPASS key,
Bypassed zones are unprotected and will not cause an alarm if violated.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Quick Bypass Enter code, Press BYPASS key.
Bypasses all faulted zones automatically.
(if programmed)
Silence Sounders
Burglary: Enter code. Press OFF key.
Also disarms system. Memory of alarm remains untilcleared.
Fire:
Press OFF key.
Memory of Alarm remains untilcleared.
“Check”:
Press any key.
Determine cause. See Page 26.
Disarm System Enter code, Press OFF key.
Also silences sounders. Memory of alarm remains until cleared.
Clear Alarm After disarming, enter code again. Console willbeep rapidly upon entry if alarm has occurred.
Memory Press OFF key again,
Alarm display will remain upon disarming untilcleared.
Duress (if active Arm or disarm “normally”, Performs desired action and sends silent alarm to central station.
and connected to but with 4th digit of code increased by “1”.
central station)
Panic Alarms Press key [A], [B], or [C] for at least 2 sec., or
See Page 22 for functions programmed for your system.
(aa programmed) (ifno A, B, or C on your console)
press keys [l]&[#+], or [4$]&[#], or [3]&[#J,
bothat same time.
Chime Mode To turn ON or OFF: Enter code.Press CHIME key. Console willsound ifdoors or windows are violated while system is
disarmed and chime mode isON.
Test Mode
To Ium 00/: Enter code, Press TEST key. Tests alarm sounder and allows sensors to be tested.
To turn OFF: Enter code, Press OFF key.
Phone Access
Consult Phone Access User’s Guide that
(Voice Module)
Permits system access remotely, via Touch-tone phone (see pages 4, 11).
accompanies Voice Module.
if app Iicable