Filter
Top Products
TROUBLE CONDITIONS
3.
4.
A display of
“BAT” with no zone number indicates that the main
standby battery in your control is weak. If this condition persists for
more than one day (with AC present), CALL FOR SERVICE.
A dis~lav of “BAT” with a zone number and a once ~er minute
“beeping;’ at the Console indicates that a low battery condit~on exists in
the wireless sensor displayed. Either replace the battery yourself, or
CALL FOR SERVICE. If the battery is not replaced within
30 days, a
CHECK display may occur.
Some wireless
sensors contain a non-replaceable long-life battery which re-
quires replacement of the entire unit at the end of battery life (e.g., 5802
Pendant and 5802CP Belt Clip Personal Emergency Transmitters and 5803
Wireless Key Transmitters).
Power Failure [f there is no console display at all, and the POWER indicator (if
present) is not lit,
operating power for the system has stopped and the
system is inoperative. CALL FOR SERVICE IMMEDIATELY.
If the message ‘!AC LOSS” or “NO AC” is displayed, and the POWER
indicator (if present)
is off, the Console is operating on battery power only.
If only some lights are out on the premises, check circuit breakers and fuses and
reset or replace as necessary. CALL FOR SERVICE IMMEDIATELY if AC
power cannot be restored.