Heatiator BIR42 Indoor Fireplace User Manual


  Open as PDF
of 56
 
46
F. Mantel, Adding Extra Support
Ifextrasupportforthemantelisneededacrossthefrontof
thereplace:
• Obtain a piece of top/bottom track used in metal
framing.
• Cutthetrackto577/8in.(1470mm)long.
• Notch each end of the track 2 in. (51 mm). See
Figure12.12.
• Placethetrackintothenotches(showninFigure12.13)
onthefrontstandoffsandsecuretotheframingonboth
sidesofthereplace(Figure12.14).
• Usedrywall screwsto fasten the mantel to the metal
framing.
Notches
in standoffs
2 in.
(51 mm)
Notches
(both ends)
Figure12.12 Notch the Metal Track
Figure 12.13 Notch in Standoffs
Secure to
framing
Figure 12.14 Secure to Framing
Heatilator•BirminghamBIR42•4059-308RevJ•1/11
 previous next