Hearth and Home Technologies DV3732SBI Indoor Fireplace User Manual


  Open as PDF
of 77
 
Hearth & Home Technologies • DV3732SBI, DV3732SBIL • 2215-900 Rev. F • 9/1254
Step 5. Fold bottom ap along score line as indicated in
Figure 13.6 and tuck into valve access area of appliance.
Splatter guard should t securely on front of unit.
Figure13.6
Once plumbing and wiring are complete on the replace,
the lower access panel may be closed until the time that the
splatter guard must be removed for ring the appliance.
Figure13.7
Step 6. To open lower access panel of splatter guard,
place one hand above score line and place two ngers
from other hand in the round holes on the front of the
splatter guard. See Figure 13.7. Pull out and fold up
the panel as shown in Figure 13.8. Disengage the tabs
on left and right bottom of splatter guard and t them
into the square holes. The tabs are now inside the front
of the splatter guard; carefully bend them down. See
Figure 13.9.
Figure13.9
Figure13.8
ToClosetheLowerAccessPanel:
Carefully disengage the tabs from the square holes and
bend the access panel to its original position. Bend the
center bottom ap and insert it into the bottom of the ap-
pliance.
ToRemovetheSplatterGuard:
Carefully grab splatter guard on or near the vertical center
on the left and right sides. Pull outward gently, but rmly,
taking care not to tear or remove the inserted tabs.
Figure13.11
Figure13.10
 previous next