GE C11 Sewing Machine User Manual


 
-
81
-
Item Specifications Remarks
Frequency jump
control
Jump frequency (3 points) and jump hysteresis width (1 point) can be pre-
set.
Restart after
momentary
power failure
Drive restarts without causing drive-trip when power supply recovers.
Control
PID control PID control function is provided standard.
Enclosure
(IEC 60529)
IP20
Cooling method Natural cooling for 1 HP or less, Fan cooling for 2 HP or more
Running,
stopped
Output frequency, output current, and PID reference value/feedback value
The CRG lamp is on when the capacitor is charged.
Program mode Function code and data code
Tripped [Cause of trip by code]
OC1 (Overcurrent: during acceleration)
OC2 (Overcurrent: during deceleration)
OC3 (Overcurrent: while running at constant speed)
OU1 (Overvoltage: during acceleration)
OU2 (Overvoltage: during deceleration)
OU3 (Overvoltage: while running at constant speed)
LU (Undervoltage)
OH1 (Overheating: Heat sink)
OH2 (Overheating: External alarm)
OL (Overload: Motor)
OLU (Overload: Drive)
Er1 (Memory error)
Er3 (CPU error)
Er6 (Operation error)
Er8 (RS485 communication error)
Lin (Input phase failure)
Indication
Running,
Tripped
Fault history data is stored and indicated for the past four trips. Data is
retained while power is off.