GE C11 Sewing Machine User Manual


 
Change during operation: N = impossible, Y* = possible (enabled by using ),
Y
= possible (enabled by using
)
-
37
-
FUNC
DATA
Func
tion
code No.
Name Setting range Unit
Min.
unit
Factory
setting
Change
during
operation
User
setting
o00 RTU Option 0 : Inactive 1 : Active
-
-
0 Y*
o01 Address 1 to 247 (Max 31 Drives) 1 Y*
o02 Mode select on no response
error
0 : Er8 by 8 times communiction/checksum
errors
1 : Er8 by 8 times communiction/checksum
errors
2 : Er8 with no communication more than
timer (o03)
3 : Retry and keep running
0 Y*
o03 Timer 1 to 60 s s 1 2 Y*
o04 Baud rate 1 : 9600 2 : 4800
3: 2400
-
1 Y*
o05 Data length 0 : 8 bits (Fixed)
-
0 Y*
o06 Parity check 0 : No checking
1 : Even parity, 2 : Odd parity
-
0 Y*
o07 Stop bits 0 : 2bits 1 : 1bit
(Automatically changed by o06 setting)
-
0 Y*
o08 No response error detection
time
0 : (No detection)
1 to 60 s
s 1 0 Y*
o09 Response interval 0.00 to 1.00 s s 0.1 0.01 Y*
o10 RTU Frequency Command 0 : F01 setting is active
1 : RTU setting is active
-
0 N
o11 RTU Operation Command 0 : F02 setting is active
1 : RTU setting is active
-
0 N
Note: For details on o01 to o11, refer to the instruction manual that came with the optional RS485 RTU
serial communication option.
O: Optional Functions