Filter
Top Products
Change during operation: N = impossible, Y* = possible (enabled by using ),
Y
= possible (enabled by using
)
-
56
-
FUNC
DATA
Data initialization
This function initializes data items set with all functions to values set in the factory.
0
Manually set value
1
Initialized (factory set value )
The display is changed from
0
to
1
when the STOP and keys are pressed simultane-
ously.
When the
FUNC
DATA
key is pressed under this condition, initial data is written and a frequency set by the
built-in POT (VR) is displayed automatically.
Auto Reset
This function selects a retry operation if the drive is tripped.
0
: Inactive
to
1
: The auto reset count is fixed to 5 and auto reset starts when 0.5s elapses after tripping .
Auto reset is attempted only for an overcurrent/overvoltage trip that occurs during operation.
Fan stop operation
0
: ON-OFF No control (always on)
1
: ON-OFF Control
(The fan is turned off when the drive temperature becomes low after operation is
stopped.)
PID control (Mode select)
0
: Inactive
1
: Active (Normal)
2
: Active (Inverse)
The feedback signal value (%) is displayed by assuming the full scale to be 100% when a PID control
operation is selected.
Factory
setting
Change during
operation
0
N
H20
Factory
setting
Change during
operation
0
N
H03
Factory
setting
Change during
operation
0
Y*
H04
H06
Factory
setting
Change during
operation
0
Y*
Select a PID control operation.