Filter
Top Products
MR810 Technical Manual Revision C REF 185042601
19
6
Figure 6.1: Removing the case bottom
6.2.2 REMOVING THE PCB
1. Unscrew the two screws holding the PCB in place.
2. Carefully lift the rear of the PCB up, the cable clamp will need to be guided out of its lo cator on the top
case. Lift the PCB away from the case front (see Figure 6.2 below), and carefully flip the PCB upside
down onto the bench.
Figure 6.2: Removing the PCB
Case clip
Cable clamp
Locating
position on
top case.