Craftsman CTS205 Siding User Manual


 
CertainTeed Vinyl Siding Installation Guide
16
Lineals
3-1/2" Snap-on lineal
Use with J-channel.
3-1/2" Lineal
5" Lineal
3-1/2" Lineal with foam insert
For use with a New Construction Window and Door Starter around
windows and doors as a casing. Two lineals can be used to create
a corner system when installed with a corner starter and corner
insert. The 3/4" channel receives siding panels. Lineals with foam
inserts are available for use with insulated siding.
3-1/2" Double channel lineal
5" Double channel lineal
For use with horizontal or vertical siding transitions. Exposure
matches 3-1/2" window and door surround lineals.
Decorative Trim
Corner block
Used with 3-1/2" lineals to finish corners around windows
and doors.
Rosette
Attaches to Corner Block as a decorative treatment.
Crown molding
Used in conjunction with 5" lineals to create a custom molded
window or door header. Can also be used with 3-1/2" lineals and
3/4" pocket J-channels. Crown has a 2-1/4" top exposed edge.
Crown molding cap
Caps the ends of a crown molding with minimal cutting.
NOTE: Shown already cut in half—one piece makes
a left and right-end cap.