Filter
Top Products
My Custom Stitch 7-1
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
Chapter 7 MY CUSTOM STITCH
DESIGNING THE STITCH
1
2
3
With the MY CUSTOM STITCHTM function, you can
sew designs that you create yourself.
Note
• Stitches that you create with MY CUSTOM
STITCHTM can be a maximum of 7 mm (9/32 inch)
wide and 37 mm (1-1/3 inch) long.
• Stitches can be designed more easily with MY
CUSTOM STITCHTM if you draw the stitch on the
enclosed grid sheet first.
1. Draw the stitch design on the grid sheet (part code
SA507, X81277-001).
1 Start point
2 End point
3 Intersection
Note
• Simplify the design so that it can be sewn as a
continuous line. For a more attractive stitch,
close the design by intersecting lines.
• If the design will be repeated and linked, the start
point and end point of the design should be at
the same height.
2. Mark the points in the design where the direc-
tion of the stitching changes.
3. Determine the x and y coordinates of each of
the marked points. This will determine the de-
sign of the stitching that will be sewn.