Filter
Top Products
Setting Up 1-9
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
No. Part Name
Part Code
U.S.A. Others
15 Low shank adapter SA131 XA6126-002
16 Screw (large) XA5904-051
17 Scissors 184783-001
18 Chalk pen 184944-001
19
Cleaning brush (P.8-3)
XA4527-001
20 Eyelet punch
(P.3-55,64)
135793-001
21 Screwdriver (large) X55467-051
22 Screwdriver (small) X55468-051
23 Spool cap (small) 130013-004
24 Spool cap (medium) × 2 X55260-053
25 Spool cap (large) 130012-004
26
Disc-shaped screwdriver
XC1074-051
27 Embroidery set
(medium)
SA427 X81273-002
H 10 cm × W 10 cm
(H 4 inch × W 4 inch)
28
Embroidery set (medium plus)
SA429 X81329-002
H 18 cm × W 13 cm
(H 7 inch × W 5 inch)
29 Spool net (P.1-37) 127610-000
30 Embroidery set (large) SA428 X81274-002
H 26 cm × W 16 cm
(H 10-1/4 inch
× W 6-1/4 inch)
31 Embroidery set (small) SA426 X81275-002
H 2 cm × W 6 cm
(H 1 inch
× W 2-1/2 inch)
32 Foot controller 120V XC1157-051
(P.1-7) 230V XC1159-001
33
Needle plate cover (P.5-29)
XA9939-051
34 Grid sheet set (P.7-1) SA507 X81277-001
35 Touch pen (P.9-3) XA9940-001
36 Knee lifter (P.1-6) XA6941-001
37 Embroidery bobbin SA-EBT XA8375-001
thread
38 Operation manual 193220-011
39 Quick reference guide 193220-060
33
3534 36
37 38 39
30
32
25
27
28
21 22 23
18 19 20
15 16 17
26
31
29
24
Note (For U.S.A. only)
Foot controller: Model P
This foot controller can be used on this machine
model ULT2001/ULT2002D.
The screw of the presser foot holder is available
through your authorized dealer (Part code XA4813-
051).