Filter
Top Products
ERROR MESSAGES
340
This message is displayed
when the bobbin is being
wound, and the motor locks
because the thread is
tangled, etc.
This message is displayed
when there is a possibility
that the data for the selected
pattern is corrupted.
This message is displayed
when the buttonhole lever is
down, a stitch other than a
buttonhole is selected, and
the “Start/ Stop” button or the
“Reverse/Reinforcement
Stitch” button is pushed.
This message is displayed
when the embroidery unit is
attached and the power is
turned on with the needle in
the down position.
This message is displayed
when the selected stitch is
not available for the specific
function.
This message is displayed
when you try to recall or save
a pattern while no USB media
is loaded.
This message is displayed
when you try to use
incompatible media.
This message is displayed
when you attempt to select a
pattern after the USB media
in which the pattern is saved
has been changed.
This message is displayed
when an error occurs with the
USB media.