Filter
Top Products
VARIOUS EMBROIDERING FUNCTIONS
302
Using the Built-In Camera to
Align the Embroidering Position
The embroidering positioning can easily be
aligned using the machine’s built-in camera and
the included embroidery positioning sticker.
a
Affix the embroidery positioning sticker to
the location in the fabric to be
embroidered. Place the embroidery
positioning sticker so that the center of the
larger circle is at center of the embroidery
pattern.
a Embroidery positioning sticker
b Center of the embroidery pattern
c Embroidery field
b
After selecting the pattern, press ,
and then press .
o A window appears so that the area containing the
embroidery positioning sticker can be selected.
Note
• When embroidery frame (small) is installed,
the built-in camera cannot be used to align
the embroidering position. Install embroidery
frame (medium) or a larger embroidery
frame.
Note
• When inserting the fabric in the embroidery
frame, check that the embroidery pattern fits
within the embroidery field for the frame that
is used.
a Embroidery field
b Embroidery pattern
c Embroidery positioning sticker
• Depending on the type of fabric that is used,
a part of the embroidery positioning sticker
may remain attached when it is peeled off.
Before using the embroidery positioning
sticker, check that it can be cleanly removed
from a scrap piece of the fabric to be used.