Brother 882-W01 Sewing Machine User Manual


 
BEFORE EMBROIDERING
Embroidery
185
5
c
Turn the main power to ON.
o The following message will appear.
d
Press .
o The carriage will move to the initialization position.
Removing the Embroidery Unit
a
Press either or , then press
.
o The carriage will move to the removal position.
b
Turn the main power to OFF.
c
Hold down the release button, and pull the
embroidery unit away from the machine.
a Release button
CAUTION
Always remove the embroidery frame before
pressing . Otherwise, the frame may
strike the embroidery foot, and possibly cause
injury.
The embroidery unit will not fit in the storage
case if this step is not done.
Note
Be sure to turn off the machine before
removing the embroidery unit, otherwise
damage to the machine may result.
CAUTION
Do not carry the embroidery unit by holding
the release button compartment.