Filter
Top Products
LCD SCREEN
18
USB Connectivity
You can perform many functions using the USB
ports on the machine. Connect the appropriate
devices according to the feature of each ports.
a Primary (top) USB port for media or card Reader/
USB card writer module* (USB2.0)
* If you have purchased the PE-DESIGN Ver5 or later,
PE-DESIGN Lite or PED-BASIC, you can plug the
included USB card writer module into the machine
as an embroidery card reader, and recall patterns.
b USB port for mouse (USB1.1)
c USB port for computer
■ Using USB Media or Embroidery
Card Reader/USB Card Writer
Module*
When sending or reading patterns using the USB
media or the embroidery card Reader/USB card
writer module*, connect the device to the primary
(top) USB port.
The primary (top) USB port processes the data faster
than the other ports.
* If you have purchased the PE-DESIGN Ver5 or later,
PE-DESIGN Lite or PED-BASIC, you can plug the
included USB card writer module into the machine
as an embroidery card reader, and recall patterns.
a Primary (top) USB port
b USB media
a Primary (top) USB port
b Embroidery card Reader/USB card writer module*
Note
• The processing speed may vary by port
selection and quantity of data.
• Do not insert anything other than USB
media into the USB media port. Otherwise,
the USB media drive may be damaged.
Note
• Two USB media cannot be used with this
machine at the same time. If two USB media
are inserted, only the USB media inserted
first is detected.
• Use only an embroidery card reader
designed for this machine. Using an
unauthorized embroidery card reader may
cause your machine to operate incorrectly.
• Embroidery patterns cannot be saved from
the machine to an embroidery card inserted
into a connected USB card writer module.
Memo
• USB media is widely used, however some
USB media may not be usable with this
machine. Please visit our website for more
details.
• Depending on the type of USB media being
used, either directly plug the USB device
into the machine’s USB port or plug the USB
media Reader/Writer into the machine’s
USB port.
• You can plug the optional embroidery card
Reader/USB card writer module* into the
primary (top) or center port, when the mouse
is not connected.
• You can plug a USB media into the center
port, but the primary (top) USB port
processes the data faster. It is
recommended to use the primary (top) USB
port.