Brother 882-W01 Sewing Machine User Manual


 
EDITING STITCH PATTERNS
158
Creating a Horizontal Mirror
Image
To create a horizontal mirror image, select a stitch
pattern then press .
Sewing a Pattern Continuously
Press to select continuous sewing or single
stitch sewing.
Changing Thread Density
(for Satin Stitch Patterns Only)
After selecting a satin stitch pattern, press to
select your preferred thread density.
Memo
To finish a complete motif while sewing the
pattern continuously, you can press the
key while sewing. The machine will
automatically stop when the motif is finished.
CAUTION
If the stitches bunch when thread density is
changed to , return the thread density to
. If you continue sewing when the stitches
are bunched, the needle may bend or break.
Memo
Even if you select a new pattern after chang-
ing the thread density, the thread density
remains the same until you change it.
You cannot change thread density for a
combined pattern after additional patterns
are added.