Filter
Top Products
USING THE SENSOR PEN
B-74
Calibrating the Sensor Pen
Before using the sensor pen for the first time, be
sure to personalize it using “Sensor Function
Calibration” in the settings screen. Doing so
allows the machine to learn the position in which
you usually hold the pen.
Hold the sensor pen at a comfortable angle and
then calibrate the machine according to the
procedure below.
Be sure to keep the sensor pen at the same angle
while calibrating the first and second points.
a
Press .
→ The settings screen appears.
b
Press .
→ The General settings screen appears.
c
Display page 6 of the General settings
screen.
d
Press while connecting the sensor
pen to the machine.
→ The Sensor Function Calibration screen appears.
e
Touch the first point of green dot marking
using the sensor pen.
* Touch on the needle plate cover.
a Needle plate cover