Brother 882-C40/C42 Sewing Machine User Manual


 
SEWING STITCH PATTERNS
S-82
e
Press the “Start/Stop” button to stop
sewing.
f
Press the “Reverse Stitch” button or
“Reinforcement Stitch” button to sew
reinforcement stitches.
Making Adjustments
Your stitch pattern may sometimes turn out poorly,
depending on the type or thickness of fabric, the
stabilizer material used, sewing speed, etc. If your
sewing does not turn out well, sew trial stitches
using the same conditions as the real sewing, and
adjust the stitch pattern as explained below. If the
pattern does not turn out well even after making
adjustments based on the pattern, make
adjustments for each pattern individually.
a
Press and select on 19/21.
Memo
If the fabric is pulled or pushed during
sewing, the pattern may not turn out
correctly. Also, depending on the pattern,
there may be movement to the left and right
as well as front and back. Guide the fabric
with your hand to keep the fabric feeding
straight and even during sewing.
Memo
When sewing character stitches, the
machine automatically sews reinforcement
stitches at the beginning and end of each
character.
When sewing is completed, trim any excess
thread between letters.
Note
When sewing some patterns, the needle will
temporarily pause in the raised position
while the fabric is fed due to the operation
of the needle bar separation mechanism
which is used in this machine. At such
times, a clicking sound different from the
sound generated during sewing will be
heard. This sound is normal and is not the
sign of a malfunction.