Filter
Top Products
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
B-17
54*
55 56 57
58
*
No. Part Name
Part Code
Americas Others
1 Zigzag foot “J” (on machine) XF3022-001
2 Monogramming foot “N” X53840-351
3 Overcasting foot “G” XC3098-051
4 Zipper foot “I” X59370-051
5 Buttonhole foot “A” X57789-251
6 Blind stitch foot “R” X56409-051
7 Button fitting foot “M” 130489-001
8
Straight stitch foot
*
SA167 F042N:
XC1973-052
9 Embroidery foot “W+” with
LED pointer
FLED1: XF4168-001 (EU area)
XF3124-001 (other area)
10 1/4” quilting foot with guide SA185 F057:
XC7416-252
11 Free motion open toe quilting
foot “O”
XF4873-001
12 Dual feed foot DF1: XF4166-001 (EU area)
XF3165-001 (other area)
13 Adapter XF3613-001
14 Screw (small) XA4813-051
15 Needle set X58358-051
16 Twin needle X59296-151
17 Ball point needle set XD0705-051
18 Bobbin × 10
(One is on machine.)
SA156 SFB:
XA5539-151
19 Seam ripper XF4967-001
20 Scissors XC1807-121
21 Cleaning brush X59476-051
22 Eyelet punch XZ5051-001
23 Screwdriver (small) X55468-051
24 Screwdriver (large) XC4237-021
25 Disc-shaped screwdriver XC1074-051
26 Vertical spool pin XC8619-052
27 Spool cap (small) 130013-154
28 Spool cap (medium) × 2
(One is on machine.)
X55260-153
29 Spool cap (large) 130012-054
30 Spool cap (special) XA5752-121
31 Bobbin clip × 10 XE3060-001
32 Spool felt (on machine) X57045-051
33 Spool net × 2 XA5523-050
34 Embroidery needle plate
cover
XE5131-001
35 Touch pen (stylus) XA9940-051
36 Knee lifter XA6941-052
37 USB cable XD0745-051
38 Alternate bobbin case
(no color on the screw)
XC8167-551
39 Bobbin case (gray, for bobbin
work)
XE8298-001
40
Straight stitch needle plate
*
XF3076-001
41 Cord guide bobbin cover
(with single hole)
XE8991-101
42 Bobbin cover (with mark) XF0750-101
43 Bobbin cover (on machine) XE8992-101
44 Foot controller XD0501-151(EU area)
XC8816-051 (other area)
45 Embroidery frame set
(medium) H 10 cm × W 10 cm
(H 4 inches × W 4 inches)
*
SA438 EF74:
XC8480-152
46 Embroidery frame set (large)
H 18 cm × W 13 cm
(H 7 inches × W 5 inches)
*
SA439 EF75:
XC8481-152
47 Embroidery frame set
(extra large)
H 30 cm × W 18 cm
(H 12 inches × W 7 inches)
SA440 EF76:
XC8482-152
48 Embroidery bobbin thread SA-EBT XC6283-001
49 Stabilizer material SA519 BM3:
XE0806-001
50 Grid sheet set SA507 GS3:
X81277-151
51 Chalk pencil XE8568-001
52 Sensor pen XF4992-001 (EU area)
XF3116-001 (other area)
53 Pen holder XF2973-001
54
Dust cover
*
XF4569-001 (882-C40)
XF4113-001 (882-C42)
55 Accessory bag XC4487-021
56 Operation manual This manual
57 Quick Reference Guide XF3617-001
58 MY CUSTOM STITCH CD
* XE8901-001
Memo
• Foot controller: Model T
This foot controller can be used on the
machine with product code 882-C40/C42.
The product code is mentioned on the
machine rating plate.
Memo
• Always use accessories recommended for
this machine.
• Placing bobbin clips on bobbins helps
prevent the thread from unwinding from the
bobbin. In addition, snapping bobbin clips
together allows the bobbins to be
conveniently stored and prevents them from
rolling around if they are dropped.
No. Part Name
Part Code
Americas Others