Filter
Top Products
UPGRADING YOUR MACHINE’S SOFTWARE
Maintenance and Troubleshooting
Appendix A-39
A
2
Upgrade Procedure Using
Computer
a
While pressing the “Automatic Threading”
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press .
c
Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.
→ “Removable Disk” will appear in “Computer (My
computer)”.
d
Copy the upgrade file to “Removable Disk”.
→ The following message will appear.
e
When the message disappears, press
.
→ The upgrade file is loaded.
f
Unplug the USB cable, and turn the
machine off and on again.
Note
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.