Filter
Top Products
29
To Decrease Setpoint Temperature
Step 1: Depress and hold “Temperature Down” button until desired setpoint temperature appears in the display.
Step 2: “Setpoint” indicator begins flashing in the display after pressing “Temperature Down” button.
Step 3: Press “SET” button for new setting to take effect immediately. The setpoint will stop flashing. If the “SET” button
is not pressed, the new temperature setting will take effect in approximately 10 seconds.
SELECT SET
Status
°F
idle
Operational
Step 1
SELECT SET
Status
°F
idle
setpoint
Operational
"Setpoint"
flashes
Step 2
SELECT SET
Status
°F
idle
setpoint
Operational
"Setpoint" flashes
for 10 seconds
Press SET for setting to
take effect immediately
Step 3