Filter
Top Products
48 | en LTC 8600 | LTC 8800 Series
Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03
13.2.10 Location 12 - Sequence Status Indication
This location indicates the status of the sequence “active” in the monitor. There are
four possible character combinations:
a.
^
R
indicates the current sequence is sequencing in a forward direction.
b.
R
V
indicates the current sequence is sequencing in a reverse direction.
c.
^
S
indicates the sequence is stopped, but if started again would sequence
in a forward direction.
d.
S
V
indicates the sequence is stopped, but if started again would sequence
in a reverse direction.
13.3 Monitor Title
The monitor message is a stationary 12-character title which may be placed on a
monitor instead of the system status display. A specific monitor message can be
programmed using the keyboard (see User Function 17), the optional LTC 8059/00
MCS package, or the optional LTC 8850/00 GUI Software package.
Table 1: Format of Monitor Overlay's System Status Display
13.4 Broadcast Message
The operator of the personal computer can send a message using the optional LTC
8059/00 MCS package or the optional LTC 8850/00 GUI Software package to all the
monitors in the system. This message may be up to 24 characters long, and can be
used to notify all users at all monitor locations of important information. The mes-
sage, along with its beginning and ending time and date, is also printed out on the
logging printer, if one is connected; and any acknowledgment from users is also
recorded. The broadcast duration may be set for 1 to 60 seconds. The message is
displayed on a line by itself.
13.5 Program Prompts
During entry of sequence programming using the keyboard, the Allegiant system
prompts the user on the monitor his keyboard is currently “controlling”. The display
will return to its previous form when the user leaves the programming mode.
123456789101112
AAAMCERMASSS
llloareobeee
aaanmrmnsqqq
rrr o /
mmmA A r L L R NNS
rr/ooeuut
mmDc c l mma
lkk
R
vw