Filter
Top Products
LTC 8600 | LTC 8800 Series en | 45
F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc.
13 Video Monitor Display
The Allegiant Series systems feature an integral text overlay with two or three rows
of 24 characters each. There are over 2000 different characters that can be dis-
played. See Chapter 20, “Character ROM Tables for LTC 8600 and LTC 8800,” on
page 86
NOTE If no video signal is present, a new line will appear stating: VIDEO NOT PRESENT.
The display is broken down into seven areas as shown in the figure
Figure 18: Monitor Overlay Display
NOTE The Monitor Overlay Display shows all six digits including leading zeros for a camera
number in 6-digit mode. In 4 digit mode, the camera number display depends on
the setting of the Miscellaneous Parameter option as set in the Master Control Soft-
ware.
13.1 Time/Date
The time/date display is generated by the system CPU microprocessor module. It is
crystal controlled and battery protected for one year (minimum) without power. The
display is updated once per second and all monitors update simultaneously. The
time/date message is always on the right side of the video display with the time on
the top line. Time displays hours, minutes, and seconds, and can be set to either 12-
hour or 24-hour operation. The date is available in three (3) user-selectable formats:
1. U.S. Format - The order for the American date display is: MM/DD/YY.
(Default for 120 VAC systems)
2. International Format - The order for the international date display is:
DD/MM/YY (Default for 220-240 VAC systems)
3. Asian Format - The order for the Asian date display is: YY/MM/DD
XXXX Status/Title 12:00:00
Camera Title 11-26-90
Extended Camera Title/Monitor Title
xx
User-selectable
2-digit “Site”
Number Mode
12-character System
Status Display or
Monitor Title
Camera
Number
12- or 24-hour
Time Display
16-character
Camera Title
User-selectable
Third Line Mode
3 Selectab
Formats:
(MM-DD-Y
DD-MM-Y
YY-MM-D
PM