Filter
Top Products
D1260/D1260B | Owner's Manual | Part I: Security system basics - View Faulted or Bypassed Points
Bosch Security Systems | 9/04 | 50410D 9
This manual uses the default idle state displays for examples of these idle states. Your security company may have
programmed custom text for the idle displays in your system. The custom text and the default text for the three
system idle displays follow.
Default Text Custom Text
Area Name Text
Appears on the top line of the display
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Throughout this manual, all examples of “AREA # NAME TEXT” will use “AREA 1 WAREHOUSE.”
The actual name of Area 1 will differ depending on the specifics of your system.
Area Is On Text
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The Silence> soft key is only shown when the keypad buzzer is active
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Area Off Text
Indicates the area is turned off
(disarmed). 24-hour points remain
armed.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Area Not Ready Text
Indicates that the area is turned off,
but not ready to arm.
View Faulted or Bypassed Points
To properly arm your system, all the doors and
windows in the system must be in the normal (not
faulted) condition. Viewing the faulted points helps you
find faulted points and correct them so proper arming
is possible.
Your keypad offers two ways of displaying faulted and
bypassed point information. The first causes the faulted
or bypassed point information to scroll automatically
through the display. The second allows you to
manually scroll through each individual point
description.
To automatically scroll faulted or bypassed points
1. Ensure your keypad shows idle text.
The View Points> soft key may be displayed on
the third line of the keypad if there are faulted
points.
2. Press any number key. The text for Area 1 is
displayed first followed by the number (#) of
faulted points on the next line
3. The display changes to show the point text
description of the faulted points. If there is more
than one faulted point, the display will
automatically cycle through all of them before
returning to idle text.
These displays scroll at the rate of 3 seconds each.