Filter
Top Products
D1260/D1260B | Owner's Manual | Part II: System Commands - WATCH MODE ? (COMMAND + 6)
28 Bosch Security Systems | 9/04 | 50410D
WATCH MODE ? (COMMAND + 6)
Watch Mode
Description
With your security system disarmed, you can use watch
mode to monitor some points. Each time some points
are faulted (door or window is opened) the keypad
chimes once and displays the point text for 60 seconds.
No alarms are generated by this mode except 24-hour
alarms (fire, panic, etc.).
When the keypad’s keypad lighting is on, the keypad
does not chime. The keys light for 20 seconds
whenever you press a key.
Use this function in residential systems to monitor
entries or exits in your home. In commercial systems it
can serve as a door chime to alert you when a
customer or delivery person enters your business.
Contact your security company to find out
which points are watch points and
whether or not your system automatically
turns the Watch Mode on whenever you
disarm.
Entering Watch Mode:
1. The display shows disarmed idle text.
Press the COMMAND key. The display shows
*System Command*
.
2. Press the 6 key.
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the WATCH MODE ?>
prompt, press its adjacent soft key.
Press ENTER.
3. The display briefly shows
Watch Mode is now
on.
The display returns to show idle text.
Exiting Watch Mode:
1. The display shows disarmed idle text.
Press the COMMAND key. The display shows
*System Command*
.
2. Press the 6 key.