Filter
Top Products
D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turning Off the System
Bosch Security Systems | 9/04 | 50410D 75
5. Enter your passcode and press ENTER.
The passcode is shown as asterisks (*) when
entered and advance from the right side of the
display to the left until all the passcode digits are
entered.
6. If the entered passcode is valid, the display
changes to show
DISARM ALL?
Press the
Disarm>
soft key to disarm all armed
areas.
7. Press the
Next>
soft key to go to the first armed
area.
8. The display changes to show
DISARM AREA 1 ?
(or the first area that is armed).
Press the
Disarm>
soft key to disarm this area.
Press the
Next>
soft key to scroll through the
remaining areas you have the authority to turn off.
To disarm the area, press the
Disarm>
soft key.
9. After turning off other areas, the command center’s
display returns to the idle text for the area you are
in.