Filter
Top Products
Solution 64
6
Bosch Security Systems 09/06 BLCC110U
User Guide
Repor ting Alarms
Your system may be programmed to send reports to your security
company. Once the report is complete, the system returns
the telephone to normal operation (check with your security
company).
Your system makes repeated attempts to send reports to your
security company. If your system fails to report, the keypad will
display the ‘service’ symbol.
About the Keypad
Your keypad has 20 keys or buttons. The buttons allow you to
input instructions and navigate the menu screens as required.
Some buttons have a secondary function which is activated by
holding them down for two seconds.
Each button’s function is described below:
Keypad Keys
Key
Description
to
The numeric keys allow you to enter you
numbers when required
Use the [MENU] and the numeric keys to
enter commands. The [MENU] key is also
used to go back one level when navigating
through menus or to exit a programming
location without saving changes.
The [ON] key allows you to turn an area
or output on. To turn all areas on at the
same time when the system has been
partitioned, press and hold the [ON] key
for two seconds.
The [PART] key allows you to turn an area
Part On. This key can also be used to
bypass a zone or multiple zones when you
press and hold for two seconds.
The [OFF] key allows you to turn an area
or output off. To turn all areas off at the
same time when the system had been
partitioned, press and hold the [OFF] key
for two seconds.
The [OK] key allows you to save any changes
and exit the command.
The [MAIL] key allows you to read stored
mail. This key can also be used to initiate
a dialler test when you press and hold for
two seconds.
The [] key allows you to move the cursor
left when programming text or telephone
numbers.
The [] key allows you to move the cursor
right when programming text or telephone
numbers.
The [↑] key allows you to navigate through
menus or to toggle characters when
programming telephone numbers.
Key
Description
The [] key allows you to navigate
through menus or to toggle characters
when programming telephone numbers.
Pressing The [] key will display current
trouble conditions when the area that the
keypad is displaying is disarmed.
+
for 2 sec
Pressing the 1 and 3 keys together and
holding them down for 2 seconds will
cause a Panic alarm to be triggered. If
programmed the sirens will sound and the
monitoring station will be notified.
+
for 2 sec
Pressing the 4 and 6 keys together and
holding them down for 2 seconds will cause
a Fire alarm to be triggered. If programmed
the sirens will sound and the monitoring
station will be notified.
+
for 2 sec
Pressing the 7 and 9 keys together and
holding them down for 2 seconds will
cause a Medical alarm to be triggered. If
programmed the sirens will sound and the
monitoring station will be notified.
Table 2: Keypad Keys and Their Function
Status Icons / LED’s
The following table describes the function of each of the status
icons.
Icon Status Meaning
The keypad can display which areas (1 – 8) are
turned on or off via the Area Icon Indicators. This
programmable option can be disabled in MENU
On
The area is turned All On or Part On
Off
The area is turned Off
Flashing
Fast
The area has an alarm
On
System power is normal
Flashing
System power is missing
Flashing
A fire alarm is active
Off
No fire alarm
On
Fire alarm in memory
(Turn the area All On and Off to Clear).
On
The existing service or trouble condition
has been acknowledged.
Off
No service or trouble conditions exist
Flashing
A service or trouble condition is present
that has not been acknowledged.
On
The area is turned Part On.
Off
The area is not turned Part On.