Filter
Top Products
Solution 64
28
Bosch Security Systems 09/06 BLCC110U
User Guide
System > System Testing >
Walk Test All Zones
MENU 7-9-0
This menu allows you to test all zones within an area at the same
time.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [9] + [0].
The keypad will display a list of areas that are available to
walk test zones.
2. Use the [
↑] and [↓] keys to select the area that you want to
do walk test, then press [OK] to select. Alternatively, you
can enter the area number, then press [OK].
The keypad will scroll all zones that you can test.
To test Z001
open then close
Zone 1 Name
Press OK or MENU
To test Z002
open then close
Zone 1 Name
Press OK or MENU
3. Open and close each zone that needs to be tested. A
zone that has been successfully tested will no longer
scroll on the keypad display.
When all zones have been tested, the keypad will display:
Selected zones have been
Tested OK
Press OK or MENU
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > System Testing >
Battery Test
MENU 7-9-1
This menu allows you to manually test the systems back up
battery. The Solution 64 will automatically test the battery once
per day and every time the system is armed.
The battery test can take up to two minutes to complete and the
keypad will display the voltage of the battery during the test.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [9] + [2].
The keypad will display the battery voltage whilst under
test:
Battery test in progress.
Please wait..
Voltage = 13.4V
To Go Back Press OK
If the battery has passed the test, the keypad will display:
Battery test Passed.
Press OK to continue
If the battery has failed the test, the keypad will display:
Battery test Failed.
Please Call for Service.
Press OK to continue
2. Press [OK] to exit.