Filter
Top Products
11
Bosch Security Systems 09/06 BLCC110U
Solution 64 User Guide
Tokens
This section outlines how to add and delete token cards that
allow an alternate method for users to turn the system on and
off via a prox reader enabled Keypad or an external reader. The
system can also be configured to automaticall open a door if it
has been fitted with an electric door lock. You should discuss
this feature with your installer for more details on your particular
installation.
A token is a small plastic tag card that has a unique ID. A user can
place the token card in front of a keypad that has a built-in token
reader to turn the system or specific areas on and off.
Access > Token >
Add Token
MENU 1-2-0
This menu allows a Master user the ability to add a new token
for for those users that have been assigned to the same area(s)
as the Master user.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [0].
A list of users will display on the keypad.
Use the [
] and [↓] keys to select the user that you want to
add a token for, then press [OK] to select.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
Press , OK or MENU
If you are using a keypad with built in reader the system
will prompt you to present the token to the keypad. Once
the token is presented the keypad we beep and return to
the menu.
To Add token for U001
JOHN SMITH swipe new
token
If you are learning the token via an external reader the
system will prompt you to select the reader to learn from.
Use the [
] and [↓] keys to select the reader and then
repeat step 3 presenting the token to the external reader.
A Master user can only delete a PIN for those users that have
been assigned to the same area(s) as the Master user. A Master
user cannot delete their own PIN.
Access > Token >
Delete Token
MENU 1-2-1
This menu allows a Master user the ability to delete a token for
those users that have been assigned to the same area(s) as the
Master user.
Enter programming mode (PIN + MENU) then,
2.
3.
4.
1. Enter [MENU] + [1] + [2] + [1].
A list of users will display on the keypad.
Use the [
] and [↓] keys to select the user who’s token you
want to delete, then press [OK] to select.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
Press , OK or MENU
When prompted press the [OK] key to confirm token
deletion.
Access > Token >
Token Status
MENU 1-2-2
This menu allows a Master user the ability to identify a token
which has been programmed into the system. Only tokens that
have been assigned to the same area(s) as the Master user cn be
identified.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [2].
The system will prompt you to present the token to the
keypad.
Once the token is presented the system will display the
owner of the token.
Token belongs to ur002
DEBBIE SMITH
Press OK or MENU
RF Keyfob
This section outlines how to add and delete RF keyfobs that
allow an alternate method for users to turn an area(s) on and off.
The RF Keyfob must be compatible with the RF Receiver that has
been installed by the security company.
Access > RF Keyfob >
Add Keyfob
MENU 1-3-0
This menu allows the security installer or a master user to program
the user’s keyfob ID number.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [3] + [0].
A list of users will display on the keypad.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
PRESS , OK or MENU
2.
3.
2.