Filter
Top Products
H25-IR Introduction
Instruction 3015-4342 3
1.3 Ordering Information
The H25-IR instrument along with its Probe type and Hose length are ordered by specifying 3 codes. The
codes must be listed in the following sequence:
Code A – Model Name
Code B – Gas Type
Code C – Probe Type and Hose Length
Table 1-1. H25-IR Instrument, Probe Type & Hose Length Ordering Information
Code Description
Code A H25IR Infrared Gas Leak Detector
Code B -1
-2
-3
-4
-5
CFC, HFC, HCFC & Halogen Gases
R600a
SF
6
CO
2
R227
Code C -1
-2
-3
-4
-5
-6
Standard Probe, 6 foot Hose
Standard Probe, 12 foot Hose
Standard Probe, LED & Button, 6 foot Hose
Standard Probe, LED & Button, 12 foot Hose
Smart Probe, 6 foot Hose
Smart Probe, 12 foot Hose
For example, to order an H25-IR that detects CFC type refrigerants, a Standard Probe with LED &
Button, and a 6 foot hose, you would order an: H25IR-1-3
1.4 Unpacking and Initial Checks
Your H25-IR Refrigerant Gas Leak Detector and all accessories were carefully inspected at the factory
before shipment, and packed so as to be highly resistant to damage while in transport.
When you receive the instrument, please unpack it promptly and make a visual inspection to make sure
that no damage has occurred during shipment and that all ordered items have been received. Your order
should consists of:
• H25-IR instrument
• Probe and Hose Assembly
• Both an 8 and 15 inch Flexible Probe Tube
• AC Power Cord
• Instruction Manual.
If damage was found, immediately file a claim with the carrier. If an item is missing, please contact
Bacharach’s Service Department for assistance (refer to Section
6.2 Service Centers).