Filter
Top Products
Instruction manual SGE 79
is
12.10.6 Displaying contribution
This option enables you to read out how much energy
the solar heating system supplies. For this data to be
displayed, the installation must be equipped with a
Q/T sensor (12.10.5 "
Setting the Q/T sensor").
Three values are reported on the display:
•
ACTUAL
, actual energy: the amount of energy
currently being supplied.
•
LAST 24hr
, energy supplied over last 24 hours.
•
TOTAL
, total energy supplied since day 1.
Call up this menu as follows:
•:
SETTINGS SOLAR
|
CONTRIBUTION
12.10.7 Displaying temperatures
This option lets you read what the solar heating
system's sensors are recording. Two values are
reported on the display:
•
S1
, temperature in the collector.
•
S2
, temperature between the inlet and outlet of the
heat exchanger in the tank.
Call up this menu as follows:
•:
SETTINGS SOLAR
|
TEMPERATURES
12.11 Setting the central heating
configuration
Use this menu to specify whether a central heating
system is connected to the installation.
Note
This function is not yet available.
•:
SETTINGS HEATING
CONTRIBUTION
ACTUAL 00000 kW
LAST 24hr 00000 kJ
TOTAL 00000 MJ
TEMPERATURES
S1 84ÉC
S2 45ÉC
SETTINGS HEATING