A SERVICE OF

logo

Connection information
Your HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. If you insert an HP bt300 or HP bt400 series Bluetooth
®
Wireless Printer Adapter into the front USB port, Bluetooth
®
devices such as PDAs
and camera phones can print to your HP All-in-One.
Note In the remainder of this chapter, the HP bt300 or HP bt400 series
Bluetooth
®
Wireless Printer Adapter is referred to simply as an HP Bluetooth
®
adapter.
Supported connection types
Description Recommended
number of
connected
computers for best
performance
Supported software
features
Setup instructions
USB connection One computer
connected with a
USB cable to the
USB port on the back
of the HP All-in-One.
All features are
supported.
Follow the Setup
Guide for detailed
instructions.
HP bt300 or HP
bt400 series
Bluetooth
®
Wireless
Printer Adapter (HP
Bluetooth
®
adapter)
One Bluetooth
®
device or computer.
Printing from a
Bluetooth
®
device
such as a PDA or
camera phone, or a
Bluetooth
®
-enabled
computer.
For information on
printing from a device
such as a PDA or
camera, see the
onscreen HP Image
Zone Help.
For information on
printing from a
Bluetooth
®
-enabled
computer, see
Connect using
Bluetooth®.
Printer sharing Up to five computers.
The host computer
must be turned on at
all times, or the other
computers will not be
able to print to the
HP All-in-One.
All features resident
on the host computer
are supported. Only
print is supported
from the other
computers.
For setup
instructions, see Use
printer sharing
(Windows) or Use
printer sharing (Mac).
Connect using a USB cable
To connect your HP All-in-One using a USB cable, follow the instructions in the
printed Setup Guide.
User Guide 25
Finish setup