Chapter 3 Configuring Devices
Using the Templates
3-36
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Configuring the Radio
Use this option to configure the device’s radio.
Procedure
Step 1 Select Radio. The menu expands and the Radio dialog box displays in the right
pane.
Step 2 Select one of the following from the Radio menu:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
• Identification—See Identifying the Radio Port, page 3-36.
• Filters—See Setting Up Radio Filters, page 3-38.
• Hardware—See Defining the Radio Hardware Settings, page 3-39.
• Advanced—See Defining the Radio Advanced Settings, page 3-44.
• Searched Channels—See Defining the Radio Searched Channels Settings,
page 3-49.
Identifying the Radio Port
Use this option to define basic identity information for the Ethernet port.
Note Changing this setting may cause the access point to reboot.
