2-3
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 2 Fault Monitoring
Displaying Faults
Severity From the list, select the severity from
P1, which is the highest severity level
to P5, which is the lowest severity
level, to display:
• P1—Severity P1 faults.
• P1-P2—Severity P1 and P2 faults.
• P1-P3—Severity P1 through P3
faults.
• P1-P4—Severity P1 through P4
faults.
• P1-P5—Severity P1 through P5
faults.
• All—Severity P1 through P5
faults, and faults that have been
cleared.
State From the list, select a states to display:
• All—Faults in all states are
displayed.
• Active—Faults are active (current)
and have not been acknowledged.
• Acknowledged—Faults that are
active and have been
acknowledged.
• Cleared—Faults that have been
cleared (no longer in an Active or
Acknowledged state).
Table 2-1 Display Faults Filter Bar (continued)
Field Description
