3-31
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Configuring the Ethernet Port
Use this option to configure the device’s Ethernet port.
Procedure
Step 1 Select Ethernet. The menu expands and the Ethernet dialog box displays in the
right pane.
Step 2 Select one of the following from the Ethernet menu:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
• Identification—See Identifying the Ethernet Port, page 3-31.
• Filters—See Setting Up Ethernet Filters, page 3-32.
• Advanced—See Defining the Ethernet Advanced Settings, page 3-34.
Identifying the Ethernet Port
Use this option to define basic identity information for the Ethernet port.
Procedure
Step 1 Select Ethernet > Identification. The Ethernet: Identification dialog box
displays in the right pane.
