3-23
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Deleting Port Filters
Procedure
Step 1 To delete a protocol filter, select the name from the Current Port Filters list, then
click Delete.
Step 2 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Creating Special Cases
Procedure
Step 1 Select the default filter for which you want to define a special case.
Step 2 Enter the following:
Table 3-6 IP Port Filters Special Cases Settings
Field Description
Special Cases
Port Enter the IP Port filter name.
Disposition From the list, select one of the following:
• Default—Use the disposition you set for the port filter.
• Forward—Use this setting to forward protocol traffic.
• Block—Use this setting to block protocol traffic.
