Filter
Top Products
Tools Needed:
16
Tools Needed:
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
NOTE: If you have a model 9400/9600
Series door with windows in the top
section or 9100 Sonoma (8’ high), skip
this step and complete Step 11.
NOTE: Model 9100 Series door over 13’
wide require a 3” U-Bar (supplied).
Place the 3” u-bar over the top rib.
Fasten each end of the u-bar to the
endcap with (2) 1/4”- 20 x 11/16” self
drilling screws.
Fasten center of the u-bar as shown
to the rib using (2) 1/4”-20 x 5/8” self
tapping screws one 6” to the left and one
6” to the right of the center of the door
section.
NOTE: After completing this step,
continue with Step 12.
NOTE: If a 3” U-Bar was installed in Step
10, skip this step.
NOTE: Model 9400/9600 glazed top
doors 13’-0” wide or greater will be
supplied with a 3” asymmetrical u-bar
for the top section.
Place the 3” asymmetrical u-bar over the
top rib. Fasten each end of the u-bar to
the endcap with (2) 1/4”- 20 x 11/16”
self drilling screws.
Fasten center of the u-bar as shown
to the rib using (2) 1/4”-20 x 5/8” self
tapping screws 6” off of the center of the
door section.
Fasten both walls of the u-bar as
shown using (2) 1/4”-20 x 5/8” self
tapping screws every 30-36 inches.
(Approximately 18 self tapping screws
per 18’ u-bar)
U-Bar
U-Bar - Asymmetrical
(2) 1/4”-20 X 11/16”
SELF DRILLING SCREWS
Power Drill
7/16” Socket
Driver
Power Drill
7/16” Socket
Driver
(2) Saw Horses
10
11
U-BAR
OPERATOR BRACKET
(INSTALLED IN THE STEP 12)
TOP DOOR SECTION
6”
6”
ATTACHING CENTER OF U-BAR ATTACHING ENDS OF U-BAR
(2) 1/4”-20 X 11/16”
SELF DRILLING
SCREWS
(2) 1/4”-20 X 5/8” SELF
TAPPING SCREWS
U-BAR
OPERATOR BRACKET
(INSTALLED IN THE STEP 12)
TOP DOOR SECTION
30” TO 36”
6”
6”
ATTACHING CENTER OF U-BAR
ATTACHING INTERMEDIATES OF U-BAR
(2) 1/4”-20 X 5/8”
SELF TAPPING
SCREWS
(2) 1/4”-20 X 5/8”
SELF TAPPING
SCREWS