Filter
Top Products
3
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.
To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com
Package Contents
(1)TORQUEMASTER
®
SPRING TUBE
DOOR SECTIONS (AS REQUIRED)
(2) TOP BRACKET SLIDES
1/4”-14 X 5/8” SELF TAPPING
SCREWS (AS REQUIRED)
1/4”-20 X 11/16” SELF DRILLING
SCREWS (AS REQUIRED)
(4) 1/4”-20 X 5/8”
CARRIAGE BOLTS
(2) #12 X 1/2” PHILLIPS
HEAD SCREWS
(2) VERTICAL
TRACKS RH/LH
(2) 3/8”-16 X 3/4”
TRUSS HEAD BOLTS
(1) CENTER BRACKET
ASSEMBLY
(2) QUICK INSTALL RH/LH
FLAGANGLE (AS REQUIRED)
(2) HORIZONTAL TRACKS RH/LH
NOTE: DEPENDING ON THE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SUPPLIED IF NOT
NECESSARY. REAR SUPPORTS MAY OR MAY NOT BE INCLUDED WITH YOUR DOOR.
ROLLERS
(AS REQUIRED)
COUNTER COVERS
(AS REQUIRED)
IDRIVE
®
OPERATOR
(SOLD SEPARATELY)
(1) OPERATOR BRACKET
LUBRICATING OIL
(AS REQUIRED)
(2) HORIZONTAL ANGLES
(21-15/16” OR 80”)
(AS REQUIRED)
(2) TOP BRACKET BASES
PULL ROPE
(IF INCLUDED)
COUNTER GEARS
(AS REQUIRED)
5/16” X 1 5/8” HEX HEAD LAG SCREWS
(AS REQUIRED)
(1) LOOSE WINDING SHAFT
(SINGLE SPRING ONLY)
3/8”- 16 X 3/4” HEX HEAD
BOLTS (IF INCLUDED)
RIGHT AND LEFT CABLE
DRUM ASSEMBLIES
WEATHER SEALS & NAILS
(IF INCLUDED)
ASYMMETRICAL U-BAR
(IF INCLUDED)
RIGHT & LEFT
DRUM WRAPS
T o rqueMaster
®
- Single and Double Spring
Installation Instructions and Owner’s Manual
9100, 9600, 5120, 5140
IMPORT ANT NOTICE!
Read these instructions carefully before
attempting installation. If in question about
any of the procedures, do not perform the
work. Ins tea d, h ave a qu ali fi ed door a gen cy
do the installation or repairs.
© Copyright 2005 Wayne-Dalton Corp. Part No. 302868 Rev. 2 08/04/2005
MANUAL 1/4”- 20 FLANGED HEX
NUTS (AS REQUIRED)
RIGHT & LEFT
END BRACKETS
U-BAR
(IF INCLUDED)
Q.I. JAMB BRACKETS
(AS REQUIRED)
(2) 3/8”- 16 HEX NUTS
36 TOOTH WORM GEAR
(AS REQUIRED)
(2) #10 PHILLIPS
HEAD SCREWS
(1) COTTER PIN(1) 5/16” X 1-1/4”
CLEVIS PIN