Filter
Top Products
4
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
5/16” X 2” HEX HEAD LAG SCREWS (AS REQUIRED)
(2) 1/4” X 2-1/2” CARRIAGE BOLTS (LIFT HANDLE)
Package Contents Continued...
The BOTTOM SECTION can be
identified by the factory attached
bottom astragal and the bottom bracket
warning labels on each end stile. This
section is always the 1st section on
four and five section doors.
The LOCK SECTION may have a yellow
and black warning label on the right
side of the section. This section is
always the 2nd section from the bottom
of the door.
The INTERMEDIATE I SECTION may
have a warning label attached to either
right or left hand endstile of the section.
This section is always the 3rd section
from the bottom of the door.
The INTERMEDIATE II SECTION is
always the 4th section on a five section
door.
The TOP SECTION is always the 4th
section on four section door and the 5th
section on five section door.
Door Section Identification
TOP SECTION
INTERMEDIATE II SECTION (5 SECTION DOORS ONLY)
LOCK SECTION
BOTTOM SECTION
BOTTOM BRACKET
WARNING LABELS
ASTRAGAL
WARNING LABEL
INTERMEDIATE I SECTION
(2) 3/8”- 16 X 3/4”
HEX HEAD BOLTS
1/4”- 20 HEX NUTS
(LIFT HANDLE)
1/4”- 20 FLANGED HEX
NUTS (AS REQUIRED)
(2) 3/8”- 16
HEX NUTS
1/4”- 14 X 5/8” SELF TAPPING
SCREWS (AS REQUIRED)
(2) 1/4”- 20 X 5/8” TAMPER-
RESISTANT SCREWS
1/4”- 20 X 7/8” SELF DRILLING
SCREWS (AS REQUIRED)
1/4”-20 X 11/16” SELF DRILLING
SCREWS (AS REQUIRED)
1/4”- 20 X 5/8” CARRIAGE
BOLTS (AS REQUIRED)
1/4”- 20 X 5/8” CARRIAGE
BOLTS (AS REQUIRED)
(2) 1/4” X 2-3/4” CARRIAGE BOLTS
5/16”- 18 HEX NUTS
(AS REQUIRED)