Filter
Top Products
21
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
INSTALLATION
IMPORTANT: WARNING TAGS MUST BE
SECURELY ATTACHED TO BOTH END
BRACKETS.
End brackets are right and left hand.
You can identify the right hand end
bracket by the disconnect cable guide
hole in the top of the bracket.
Beginning with either side, slide the end
bracket onto the winding shaft so that
the grooves in the ratchet wheel fit onto
the winding shaft splines.
Secure end bracket to the jamb using
(1) 5/16” x 2” hex head lag screw and
(1) 5/16”-18 x 3/4” carriage bolt and
5/16” hex nut.
NOTE: Install carriage bolt and hex nut
first then apply lag into header.
Repeat for other end bracket.
21
End Brackets
Power Drill
7/16” Socket
Driver
1/2” Wrench
Step Ladder
Cable Drum
No space between Ratchet
Pawl and Cable Drum
indicates engagement
Cable Drum
Ratchet Pawl
ENGAGED SIDE VIEW
No space between
Ratchet Pawl and
Cable Drum
ENGAGED UNDERNEATH VIEW
Space between Ratchet Pawl
and Cable Drum
non-indicates engagement
Cable Drum
Ratchet Pawl
DISENGAGED SIDE VIEW
No space between
Ratchet Pawl and
DISENGAGED U
NDERNEATH VIEW
UPPER POSITION
LOWER POSITION
LOWER POSITION SIDE VIEW
UPPER POSITION SIDE VIEW
Ratchet Pawl in Lower Position
Ratchet Pawl in Upper Position
Use these Illustration, in conjunction with the Instructions on the other side of
this label.
WA RNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
T o avoid possible severe or
fatal injury,
DO NOT
remove
fasteners from ratchet bracket
until spring(s) are fully
wnwound.
T o safely unwind spring(s)
read
and follow the directions in the
installation instructions/owners
manual.
DO NOT REMOVE THIS TAG.
RIGHT END
BRACKET
RATCHET
WHEEL
TEETH
POINTING
UPWARD
Cable Drum
No s
pace between
Ratche
t
Pawl and Cable Drum
indicates engagement
Cab
le D
rum
Ratchet
Pawl
ENGAGE
D SIDE VIEW
No s
pace
between
Ratchet Pawl
and
Cable Drum
ENGAGED
UNDERNE
A
T
H VIEW
Spac
e between Ratchet P
awl
and C
able Drum
non-indicates engage
ment
Cab
le Drum
Ratchet Pawl
DISE
NGA
GED
SIDE VIEW
No s
pace
betwe
en
Ratc
het Pawl and
DISENGA
GED U
NDERNEA
TH VIEW
UPPER
POSI
TION
LOW
ER POSITION
LOW
ER POSITION
SIDE VIEW
UPPER POSI
TION
SIDE VIEW
Ratc
het
Pawl
in Lower
Position
Ratc
het Pawl
in U
pper Po
sition
Use these Illus
tration, in c
onj
unction with the In
structions on the other
side of
this label.
WARNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
To avoid possible severe or
fatal injury,
DO NOT
remove
fasteners
from ratchet bracke
t
until spring(s) are fully
wnwound.
To safely unwind spring(s)
read
and follow the directions in the
installation instructions
/owners
manual.
DO NOT REMOVE THI
S TAG.
5/16” X 2”
HEX HEAD LAG
5/16”-18 x 3/4”
CARRIAGE BOLT
Cable
Drum
No
space
betwee
n R
atchet
Paw
l a
nd Cable Drum
ind
icate
s engagement
Cable D
rum
Ratch
et Pawl
ENG
AGE
D SIDE
VIEW
No
space
betwee
n
Rat
chet Pawl
and
Cable Drum
ENGAG
ED UNDE
R
NE
A
T
H VIEW
Space
between Ratchet Pawl
and Cable Drum
non-indic
ates engage
men
t
Cable Drum
Ratch
et Pawl
DISE
NGAGED S
IDE V
IEW
No space between
Rat
chet Pawl
and
DISE
NGAGED U
NDERNE
A
TH VIEW
UPPER
POS
ITION
LOWER
POS
ITION
LOWER P
OSITION SI
DE VIEW
UPPE
R POS
ITION SIDE VIEW
Ratch
et Pawl in Lowe
r P
osition
Ratch
et Pawl in Upper Posit
ion
Use
the
se Illustration,
in co
njunction w
ith the Instruct
ions
on the other side of
this l
abel.
WA RNING
Rachet Br
acket is
under
EXTREM
E SPRING
TEN
SION
.
To avoid possible
severe or
fatal injur
y,
DO NOT
re
move
fasteners
from rat
chet
bracket
until spr
ing(
s) a
re full
y
wnwo
und.
To saf
ely
unwi
nd spring(s)
read
and fol
low t
he directio
ns in the
inst
allati
on instructions/owners
manual.
DO NOT RE
MOVE THIS TAG
.
SPLINES
WINDING
SHAFT
GROOVE
DISCONNECT
CABLE GUIDE
HOLE
RIGHT END
BRACKET
WARNING
TAG
5/16”-18 HEX NUT
BLACK TOOTH