Filter
Top Products
3
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Package Contents
(1) TORQUEMASTER
®
SPRING TUBE
(2) HORIZONTAL TRACKS WITH ATTACHED HORIZONTAL ANGLE RH/LH
NOTE: DEPENDING ON THE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SUPPLIED IF NOT NECESSARY.
REAR SUPPORTS MAY OR MAY NOT BE INCLUDED WITH YOUR DOOR.
DOOR SECTIONS (AS REQUIRED)
(2) VERTICAL
RH/LH
TRACKS
(2) FULLY ADJUSTABLE
RH/LH FLAGANGLES
U-BAR
(AS REQUIRED)
(2) TOP BRACKET
SLIDES
(2) TOP BRACKET
BASES
(1) LOOSE WINDING SHAFT
(SINGLE SPRING ONLY)
#1, #2, #3 & #4
HINGES (AS REQUIRED)
RIGHT AND LEFT
BOTTOM BRACKETS
ROLLERS
(AS REQUIRED)
RIGHT AND LEFT CABLE
DRUM ASSEMBLIES
#6 SCREW EYE AND PULL
ROPE (IF INCLUDED)
(2) LIFT HANDLES
& SPACERS
(1) CENTER BRACKET
ASSEMBLY
RIGHT & LEFT
END BRACKETS
Cable Drum
No space betw
een Ratchet
Pawl
and Cabl
e Drum
indicates engagem
ent
Cable Drum
Ratchet
Pawl
ENGA
GED SI
DE VIEW
No space betw
een
Ratchet
Pawl
and
Cable Drum
ENGA
GED UNDERNEATH VIEW
Space between Ratchet Pawl
and Cabl
e Drum
non-indicates engagem
ent
Cable Drum
Ratchet Pawl
DISENGAGED
SIDE VIEW
No space betw
een
Ratchet
Pawl
and
DISENGA
GED U
NDERNEATH VIEW
UPPER
POSITION
LOWER POSI
TION
LOWER
POSITION
SIDE VIEW
UPPER
POSITION SIDE VIEW
Ratchet Pawl
in Low
er Position
Ratchet
Pawl in Upper Pos
ition
Use these Illustration
, in conjunction with
the Instructions on the other side of
this label.
WARNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
To avoid possible severe or
fatal injury,
DO NOT
remove
fasteners from ratchet bracket
until spring(s) are fully
wnwound.
To safely unwind spring(s)
read
and follow the directions
in the
installation instructions/owners
manual.
DO NOT REMOVE THIS TAG.
Ratchet
Pawl
ENGA
GED
SIDE VIEW
No space betw
een
NDERNE
ATH VIEW
W ARNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
To avoid possible severe or
fatal injury,
DO NOT
remove
fasteners from ratchet bracket
until spring(s) are fully
wnwound.
To safely unwind spring(s)
read
and follow the directions in the
installation instructions/owners
manual.
DO NOT REMOVE THIS TAG.
MANUAL
8000 Series, Model 46
IMPORTANT NOTICE!
Read these instructions carefully before
attempting installation. If in question about
any of the procedures, do not perform the
work. Instead, have a qualified door agency
do the installation or repairs.
© Copyright 2005 Wayne-Dalton Corp. Part No. 323295 New 11/08/2005
TorqueMaster
®
- Single and Double Spring
Installation Instructions and Owner’s Manual
Portland Source Plant
JAMB BRACKETS
(AS REQUIRED)
RIGHT & LEFT
DRUM WRAPS
WEATHER SEAL &
NAILS (IF INCLUDED)
(2) STEP PLATES