Filter
Top Products
VIVOTEK
98 - User's Manual
Video clip: Select to send video clips when a trigger is activated.
■ Source: The source of video clip, which will be identical to the time shift caching stream. For more
information about time shift caching stream, please refer to page 61.
■ Pre-event recording
The Network Camera has a buffer area; the camera can temporarily hold data up to a certain limit.
Enter a number to decide the duration of recording before a trigger is activated. The upper threshold is
9 seconds.
■ Maximum duration
Specify the maximum recording duration in seconds. The duration can be up to 20 seconds.
For example, if pre-event recording is set to five seconds and the maximum duration is set to ten
seconds, the Network Camera continues to record for another 4 seconds after a trigger is activated.
■ Maximum le size
Specify the maximum le size allowed.
■ File name prex
Enter the text that will be appended to the front of the le name.
For example:
Click Save to enable the settings, then click Close to exit the page.
System log: Select to send a system log when a trigger is activated.
Click Save to enable the settings, then click Close to exit the page.
When completed, click Save to enable the settings and click Close to exit this page. The new media
settings will appear on the Event Settings page.
Video_20080104_100341
Date and time suffix
The format is: YYYYMMDD_HHMMSS
File name prefix
1 sec. 2 sec. 3 sec. 4 sec. 5 sec. 6 sec. 7 sec. 8 sec. 9 sec. 10 sec.
Trigger Activation